6CM32C
The 6CM32C generator set brings to the offshore industry a legacy of proven reliability and durability in the marine industry. CM offshore generator sets feature standard modular designs, engine-mounted pumps and filters, and a full range of factory attachments that make their installation simple and efficient.Ideal applications for the 6CM32C offshore generator sets are main power on-board production vessels and platforms.Complete package offerings are MCS type-approved and compliant with IMO Tier II emissions standards, making their integration into vessels and platforms a simplified operation.Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.Cat 6CM32C offshore generator set. Ratings: 2910 ekW (3640 kVA) @ 50/60 Hz (600 rpm). IMO Tier II emissions compliant.
engine specifications
Minimum Rating2910.0 ekW
Maximum Rating2910.0 ekW
EmissionsIMO Tier II
AspirationTurbocharged-Aftercooled
Engine ControlElectronic
Generator Set ControlElectronic
Weight73000.0 kg
Stroke480.0 mm
Bore320.0 mm
Displacement232.0 L
dimensions
Length9302.0 mm
Height5275.0 mm
Width2639.0 mm
capacity for liquids
Cooling System (Engine)1050.0 L
Lube Oil System (Refill)3300.0 L
6CM32C STANDARD EQUIPMENT
- engine
Motor-driven barring gear, fitted on engine
Reversing contractor and push button switch with cable
Electronic speed setting equipment with actuator and speed pick-up
Emergency shutdown equipment with pushbutton, separate, formanual emergency stop - engine indicators
Gauge board with set liquid damped pressure gauges for:fuel, lubricating oil, fresh water, starting air, and charge air.
On-engine thermometers for fuel, lubricating oil, fresh water,and charge air
Electric remote speed indicator
Turbocharger and remote speed indicator
Exhaust gas temperature indicator - control
Manual control on engine, including: control panel with start /stop key, speed setting device, mechanical shutdown device, change over of control functions from engine to remote control
Starting solenoid valve on engine, 24 V DC
Separate electronic speed governor - monitoring for unattended operation
Pressure switches, mounted on engine, for:
Switches for:
Control Cabinet with housings for wall mounting, including: - starting air system
Separate non-return valve for the starting air pipe to the engine - air intake system
Air intake filter, fitted on the turbocharger
– Air bottles, separate - fuel system
Separate circulating pump driven by electric motor, horizontalor vertical
Duplex filter with differential pressure indication - exhaust system
Turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device
Expansion joint separate
Separate silencer and spark arrester, unlagged 35 dB(A) - fresh cooling water system
HT pump, fitted on engine
LT pump, separate, vertical design, electric motor driven
HT thermostat, not powered and separate
Engine preheating equipment, fitted on base frame - lubricating oil system
Plate cooler, fitted on engine
Force pump, fitted on engine
Prelubrication pump, fitted on base frame, electric motor driven
Boll and Kirch automatic backflushing filter, separate
Duplex filter with differential pressure indication, separate
Pressure control valve, separate
Thermostat, not powered, separate - connecting parts – engine
Set of connecting parts between flange coupling and flywheel
Flexible flange coupling between engine and generator
Base frame with flywheel guard and incorporating lube oil sump tank,for engine and generator
Mounting of engine and generator on the base frame
Set of bonded rubber rails for resilient mounting of the base frame
Set of flexible pipe connections - tools
Set of tools for the engine including hydraulic tightening tools and nozzle tester
Set of tools for turbocharger
Inside micrometer for cylinder liners
Ruler for cylinder liner - spare parts
Set of engine spare parts for unrestricted operation
Set of spare flexible pipe connections