G3516B LOW EMISSIONS GAS COMPRESSION ENGINE
SPECIFICATIONS
Minimum Rating1029.0 bkW
Maximum Rating1029.0 bkW
EmissionsNSPS Site Compliant Capable
engine specifications
Minimum Rating1029.0 bkW
Maximum Rating1029.0 bkW
EmissionsNSPS Site Compliant Capable
Displacement69.3 L
AspirationTurbocharged-2 Stage Aftercooled
Flywheel and Flywheel HousingSAE No. 00
Flywheel Teeth183
Weight (dry)8401.0 kg
Oil Change Interval1000 hr
Ignition, ProtectionADEM™ A3
Stroke190.0 mm
Bore170.0 mm
capacity for liquids
Cooling System221.5 L
Lube Oil System (refill)424.0 L
G3516B STANDARD EQUIPMENT
- air inlet system
Axial flow air cleaners
Service indicator
Cleanable - cooling system
Two-stage charge air cooling:
Engine cooling and charge air cooling thermostats - exhaust system
Dry exhaust manifolds and turbocharger housings - flywheels and housings
SAE 00 flywheel
SAE 00 flywheel housing
SAE standard rotation - fuel system
Electronic fuel metering valve
Requires 7-50 psig gas supply
Gas pressure regulator
Gas shutoff valve - instrumentation
Remote-mounted Advisor control panel
Interconnect harness - lube system
Top-mounted crankcase breathers
Oil cooler
Oil filter and oil sampling valve
Drain valve
Turbo oil accumulator
API B16.3 approved gas/air-driven pre-lube system - torsional vibration analysis
Caterpillar provided - mounting
Rails - control panels
4" LCD Advisor display panel
Shipped loose - starting system
90 psi TDI starter
150 psi TDI starter - power takeoffs
Front housing, two sided
Front lower LH accessory drive - protection system — displayalarmshutdown
Low oil pressure
Oil filter differential pressure
High fuel or oil temperature
Engine oil to engine coolant
Differential temperature
High coolant temperature
Engine speed
Engine load
Battery voltage
Detonation
Manifold air temperature
Coolant JW inlet/outlet pressure
Left turbo inlet temperature
Right turbo inlet temperature
Cylinder port temperature - protection system — display only
Service hours
Oxygen level - general
Paint — Cat yellow
Dual 23" vibration damper with guard
CSA Certification, Class 1 Division 2 Groups C and D
G3516B OPTIONS
- air inlet system
Rectangular air inlet adapter
Circular air inlet adapter - charging system
Battery Charger 20 amp - connections
Mechanical joint assembly
Inlet connection - exhaust system
Flexible fittings available at first production build
Elbows and mufflers - instrumentation
Optional interconnect harness - lube system
Shipped with lube oil - mounting system
Rails - power takeoffs
Front stub shaft - literature
Options available - packing