CAT C2.2 MARINE GENERATOR SET
Cat® C2.2 Diesel Marine Generator Set has single phase ratings of 50 Hertz at 16.0 and 22.5 ekW and 60 Hertz at 19.0 and 27.0 ekW that meet U.S. EPA Tier 3 and EU IW emission standards.The Cat® C2.2 also has three phase ratings of 50 Hertz at 16.0 and 22.5 ekW and 60 Hertz at 19.5 and 27.0 ekW that meet U.S. EPA Tier 3 and EU IW emissions standards. This marine gen set is available in 12 or 24 volt as an open gen set or as an enclosed package.
generator set specifications
Minimum Rating16 ekW (16kVA)
Maximum Rating27 ekW (27 kVA)
Frequency50 Hz or 60 Hz
Speed1500 rpm (50Hz) or 1800 rpm (60 Hz
generator set configurations
Emissions/Fuel StrategyEPA Tier 3, IMO NST, EU IW
engine specifications
Engine ModelC2.2, In-line 4, 4-Stroke-Cycle Diesel
AspirationNaturally Aspirated
Bore84.0 mm
Stroke100.0 mm
Displacement2.2 L
Governor TypeElectrical Ischronous
Fuel SystemFuel filter — RH or LH service, fuel priming, fuel transfer pump, flexible fuel lines
generator specifications
Frame Size2.2
ExcitationAREP
Pitch2/3 pitch
Number of poles4
Number of leads4
InsulationClass H
IP Rating23
Wave form Deviation (Line to Line)
Voltage regulatorSteady State
Voltage Regulation±0.5%
dimensions
WeightsLength (Open Set)
1147 mm
Dimensions Weights
length enclosed set
1170 mmDimensions
weights
Width (Open Set)521 mm
dimensions
WeightsWidth (Enclosed Set)
608 mm
Dimensions Weights
height open set
825 mmDimensions
weights
Height (Enclosed Set)775 mm
dimensions
WeightsMinimum Approx. Weight
389 kg
Dimensions Weights
maximum approx weight
466 kg
C2.2 STANDARD EQUIPMENT
- air inlet system
Air cleaner, single element canister type with rain cap (open generator set only) - cooling system
Belt-driven centrifugal jacket water pump, gear-driven seawater pump, heat exchanger with copper nickel tubes, expansion tank - control system
Electronic isochronous governor - exhaust system
Watercooled exhaust manifold and elbow - fuel system
Fuel filter — RH or LH service, fuel priming, fuel transfer pump, flexible fuel lines - generator
Single-phase — brushless, shunt excited, 4-pole, 4-lead reconnectable with class H insulation, automatic voltage regulation ±0.5%, 2/3 pitch, IP23 water protection, solid state voltage regulator with integral voltage adjustment potentiometer, connection poles; - lube system
Lubricating oil, oil filter (RH), dipstick (RH), fumes disposal (closed system) - mounting system
Anti-vibration mounts, connected to drip tray and steel base sitting on PVC foam sound-absorbent pad - protection system
Electronic automatic safety shutdown for low oil pressure, high water temperature, high exhaust (wet exhaust only) temperature, and overspeed - starting system
12 or 24 volt electronic starting motor, 12 volt 55 amp alternator - general
Single-side service (RH), decals, literature
C2.2 OPTIONS
- sound attenuated enclosure
- deluxe instrument panel
- basic instrument panel
- remote instrument panel extension harness
- ac circuit breakers
- flexible fuel lines
- primary fuel filterwater separator
- siphon break
- keelcooling kit
- exhaust system components
- oil drain pump
- insulated electric system
- noise reducing air inlet duct