3516B GENERATOR SET ENGINE
The 3516B Marine Generator Set incorporates a separate circuit aftercooling (SCAC) or sea water aftercooling (SWAC) system for all configurations. The primary advantage of the SCAC systsem is reduced aftercooler corrosion since no sea water circulates through the aftercooler. Many other improvements on these engines contribute to minimizing owning and operating costs. A strengthened fuel injection actuation system and rear gear train maintain reliability and durability while providing higher injection pressures. The 3516B also features thermo-laminated heat shields on all marine configurations to maintain surface temperatures below Marine Classification Society regulations.
SPECIFICATIONS
Minimum Rating1180 eKW (1475 kVA)
Maximum Rating1825 eKW (2281 kVA)
Frequency50 Hz or 60 Hz
generator set specifications
Minimum Rating1180 eKW (1475 kVA)
Maximum Rating1825 eKW (2281 kVA)
Frequency50 Hz or 60 Hz
Speed1000 rpm, 1200 rpm, 1500 rpm, 1800 rpm
generator set configurations
Emissions/Fuel StrategyIMO I, IMO II (1600 eKW @ 50 hz only)
engine specifications
ConfigurationVee 16, 4-Stroke-Cycle Diesel
Bore170.0 mm
Stroke190.0 mm
Displacement69.0 L
generator set dimensions
Length5076 mm (199.8 in) to 5611 mm (220.9 in)
Width1703 mm (67.1 in) to 2144 mm (84.4 in)
Height2053 mm (80.8 in) to 2100 mm (82.7 in)
Weight11354 kg (25030 lb) to 13538 kg (29845 lb)
3516B STANDARD EQUIPMENT
- air inlet system
Separate Circuit aftercooler core, corrosion resistant coated (air side) Air cleaner, regular duty Dual Turbochargers, 152 mm (6 in) OD straight connection - control system
Caterpillar A-III Electronic Engine Control, with Electronic Unit Injector Fuel System Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module) - cooling system
Oil cooler Thermostats and housing, full open temperature 92 C (198 F) Jacket water pump, gear driven, centrifugal Auxiliary fresh water pump Expansion tank Auxiliary sea water pump, centrifugal, non-self-priming - exhaust system
Dry gas tight exhaust manifolds with heat shields Dual Turbochargers with watercooled bearings and heat shields Exhaust outlet, vertical, 305 mm (12 in) round flanged outlet on engines @ 1500 or 1800 rpm Exhaust outlet, vertical, 203 mm (8 in) round flanged outlet on engines @ 1200 or 1000 rpm - flywheels
FLYWHEEL HOUSINGS - flywheel sae no 00 183 teeth flywheel housing sae no 00
FUEL SYSTEM - fuel filter rh with service indicators###fuel transfer pump###electronically controlled unit injectors
INSTRUMENTATION - overspeed shutdown notification light###emergency stop notification light###prelube override###shutdown override###graphical unit marine power display for analog or digital display of###engine oil pressure engine water temperature fuel pressure system dc voltage air inlet restriction rh
LH exhaust temperature Fuel filter differential Oil filter differential Service meter Engine speed Instantaneous Fuel Consumption Total Fuel Consumed Engine Control Switch (4 position) Alarms are prioritized Overspeed shutdown notification light Emergency stop notification light Prelube override Shutdown override - lube system
Crankcase breather, Top mounted Oil filter, RH Oil filler and dipstick, RH Deep sump oil pan Oil pump, gear type - mounting system
Rails, engine mounting, engine length, industrial type, 254 mm (10 in), C-channel - power takeoffs
Accessory drive Lower RH, Lower LH Front housing, Two-sided - protection system
A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection: - general
Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes
NOTE: 1. Engines for heat exchanger cooling do NOT include heat exchanger. 2. When used with competitive generator, a TVA is recommended. An alternative vibration damper may be required. 3. Engine is wired for auto start stop.
3516B OPTIONS
- air inlet system
Air Cleaner Removal
Remote Air Inlet Adapters - charging system
Battery Chargers
Charging Alternators - control system
Load Sharing module
Local speed throttle control - cooling system
Water level switch gauge
Coolant level sensors
Connections
Keel Cooling Conversions
Radiator cooling conversion
Heat exchangers
Auxiliary water pumps
Sea water pump removal
Air separator - exhaust system
Exhaust outlet
Flexible fittings
Elbows
Flanges
Flange and exhaust expanders
Mufflers - fuel system
Fuel Cooler
Fuel priming pumps
Flexible fuel lines
Rigid Fuel Lines
Primary fuel filter
Fuel level switch - generators and generator attachments
Low voltage connection
Generator conversion
RFI filter
Bearing temperature detectors (RTD
Manual voltage control
Air filter - instrumentation
PL1000T Communication Module
PL1000E Communication Module
Customer Interface Box
Thermocouples
Remote panel display
Remote cylinder temperature display - lube system
Oil Pan
Oil pan accessories
Sump pumps
Prelubrication Options
Lubricating oil
Centrifugal Oil Filter - mounting system
Vibration isolators
Rails - power takeoffs
Flywheel guard
Flexible coupling
Coupling hub
Front housing accessories
Upper left hand front location
Upper left hand rear location
Upper right hand front location:
Upper right hand rear location
Lower left hand front location
Front housing accessory drives
Front power take-offsFront power take-offs
Crankshaft pulleys
Damper guard removals - protection system
Air inlet shutoffs
Switches and contactors
Explosion relief valve
Sensors - spare part kits
Engine Parts Kits - starting system
Starting motors or barring divice
Air starting motors options
Starting aids
Battery sets - 24 volt - Dry
Battery rack - general
Tool set
Caterpillar datalink wire