CAT C32 ACERT HIGH PERFORMANCE MARINE PROPULSION ENGINE (TIER 3 REC)
C32 ACERT propulsion engine ratings of 1925 mhp (1900 bhp) 1417 bkW, 1825 mhp (1800 bhp) 1342 bkW, and 1622 mhp (1600 bhp) 1193 bkW are available with heat exchanger cooling. These ratings are compliant for U.S. EPA Tier 3 Recreational, EU Stage IIIA, and IMO II. The 1600 and 1800 bhp ratings are also meet US EPA Tier 3 Commercial Standards. The engine configuration includes an air cleaner and CCV system as well as jacket water aftercooling. Additional features include a “plug-in PTO”, an MECP I control panel, and hybrid fuel lines. The MECP I panel has a monochrome display for engine parameters, external outputs for customer installed visible and audible alarms, Start/Stop buttons, and an Off/Local/Remote switch.
SPECIFICATIONS
Power Range1600-1900 bhp (1193-1417 bkW)
Speed Range2300 rpm
ConfigurationVee 12, 4-Stroke-Cycle Diesel
ratings
Power Range1600-1900 bhp (1193-1417 bkW)
engine
Speed Range2300 rpm
ConfigurationVee 12, 4-Stroke-Cycle Diesel
AspirationTTA
Bore145.0 mm
Stroke162.0 mm
Displacement32.1 L
Rotation (from flywheel end)Counterclockwise
EmissionsEPA Tier 3, IMO II, EU IW
dimensions
WeightsLength
21060 mm
Dimensions Weights
width
1482.0 mmDimensions
weights
Height1445.0 mm
dimensions
WeightsDry Weight
30750 kg
C32 ACERT Tier 3 Recreational STANDARD EQUIPMENT
- air inlet system
Air Cleaner System with washable filter elements and fumes disposal (closed system)
Turbocharger, jacket water cooled
Turbocharger inlet, 152 mm (6 in) OD straight connection - control system
Programmable Low Idle (550 - 750 rpm)
Electronic diagnostics and fault logging
Engine and transmission monitoring (speed, temperature, pressure)
Electronic fuel/air ratio control
Engine Protection Mode for extended ambient conditions
70-pin customer connector (Upper front-facing customer wiring connector and Service Tool connection)
Throttle Input signal options - cooling system
Sea Water Aftercooled Engine
Jacket water pump, gear driven
Sea water pump, rubber impeller, gear driven
Sea water Pump - jw heat exchanger connection 762 mm 3in od###coolant recovery system
EXHAUST SYSTEM - watercooled exhaust manifold
turbocharger
4 Bolt 130 mm (5.12 in) diameter flanged outlet - flywheels
FLYWHEEL HOUSINGS - flywheel housing
FUEL SYSTEM - simplex fuel filters spinon rh
LH service
Fuel connections size:
Plate Type Fuel Cooler (Jacket Heat Exchanger)
Fuel transfer pump, gear driven
Manual fuel priming pump
Hybrid fuel line design - lube system
Simplex Oil Filters, RH or LH service
RH or LH service oil filler locations
RH or LH service dipstick
Oil pump, gear driven
Shallow Sump - mounting system
Front support - adjustable - power takeoffs
Front Poly-V groove pulley (Quantity 1) for auxiliary drives - general
Lifting eyes
Front damper guard
RH or LH service options
C32 ACERT Tier 3 Recreational OPTIONS
- exhaust system
Muffler
Muffler Spark Arresting - charging system
Battery Chargers
Charging Alternators
Ammeter - fuel system
Water Separator - instrumentation
Instrument Panels
OEM Wiring Harness
Engine to Engine Harness
Gauges
Transmission Sensors
Exhaust Temperature Sensors - lube system
Transmission Oil Cooler - mounting system
Adapter Kits
Isolator Mounts - power takeoffs
Rear Hydraulic Pump Drive - protection system
Fuel and Oil Shielding - starting system
Electric Starting Motors - Single 24 Volt
Starting Aids - JW Heaters
Battery Sets - 24 Volt - Dry - control system
Instrument Panels - packing
Engine Protective Cover
Storage Preservation
Export Packing