16M3 MOTOR GRADER
The 16M3 Motor Grader will have a direct impact on mine site productivity and costs. The haul road is either the mine’s greatest asset or greatest liability. When haul roads are kept in top condition, trucks live longer and run faster. Good road conditions are key on extending truck life, reducing maintenance, lowering fuel costs and reducing tire damage, as a result, cycle times are improved and more ore is produced at a lower cost. The 16M3 is ideal fit for:<ul><li>Small to medium size mining operations which run 150 ton or smaller hauling trucks.</li><li>As a complement to a 24M size motor grader fleet in large mining operations where additional versatility is required for ditch and berm building and cleaning, maintenance of secondary narrower roads or side/bank slope work.</li></ul>The 16M3 includes features that provide large benefits on operating cost reduction, uptime & performance improvements as well as enhanced safety.
SPECIFICATIONS
Base Power (1st gear) - Net216 kW
Engine ModelCat® C13 ACERT™ VHP
Bore130 mm
BENEFITS AND FEATURES
operating cost reduction
High mechanical availability is one of your top concerns. The 16M3 helps reduce downtime ...
LEARN MOREenhanced performance and ...
You measure profitability by the ore you produce – and the more cost effectively you do ...
LEARN MOREsafety
You consider the safety of your workers a top priority, and we’re doing our best to ...
LEARN MOREengine
Base Power (1st gear) - Net216 kW
Engine ModelCat® C13 ACERT™ VHP
Bore130 mm
Stroke157 mm
Speed @ Rated Power2,000 rpm
Base Power (1st gear) – Net (metric)216 kW
EmissionsU.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)
EmissionsTier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country
EmissionsTier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country
VHP Range – Net216-259 kW (290-348 hp)
Torque Rise: Tier 4/Stage IV/Japan 2014 (Tier 4)43%
Torque Rise: Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent39%
VHP Range – Net (metric)216-259 kW (294-353 hp)
Torque Rise: Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent39%
Maximum Torque ISO 9249: Tier 4/Stage IV/Japan 2014 (Tier 4)1771 N∙m
Maximum Torque ISO 9249: Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent1721 N∙m
Maximum Torque ISO 9249: Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent1721 N∙m
Derating Altitude: Tier 4/Stage IV/Japan 2014 (Tier 4)3810 m
Derating Altitude: Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent3711 m
Derating Altitude: Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent3954 m
Displacement12.5 L
Number of Cylinders6
Standard – Fan Speed: Maximum1,450 rpm
Standard – Fan Speed: Minimum550 rpm
Standard – Ambient Capability50 ° C
weights
Operating Weight - Typically Equipped32411 kg
weights tier 4stage ivjapan 2014 tier 4 final*
Gross Vehicle Weight – Typically Equipped: Total32411 kg
Gross Vehicle Weight – Typically Equipped: Front Axle8733 kg
Gross Vehicle Weight – Typically Equipped: Rear Axle23678 kg
Gross Vehicle Weight – Base**: Total28816 kg
Gross Vehicle Weight – Base**: Front Axle8134 kg
Gross Vehicle Weight – Base**: Rear Axle20682 kg
Gross Vehicle Weight – Maximum Tested: Total38500 kg
Gross Vehicle Weight – Maximum Tested: Front Axle11850 kg
Gross Vehicle Weight – Maximum Tested: Rear Axle26650 kg
moldboard
Blade Width4.9 m
Height787 mm
Thickness25 mm
Arc Radius413 mm
Throat Clearance126 mm
Cutting Edge – Width203 mm
Cutting Edge – Thickness25 mm
End Bit – Width152 mm
End Bit – Thickness19 mm
Blade Pull* – Base GVW18615 kg
Blade Pull* – Maximum GVW23985 kg
Down Force – Base GVW13945 kg
Down Force – Maximum GVW19895 kg
Width4.9 m
dimensions approximate
Height – Top of Cab3719 mm
Height – Front Axle Center733 mm
Length – Between Tandem Axles1841 mm
Length – Front Axle to Moldboard3066 mm
Length – Front Axle to Mid Tandem7365 mm
Length – Front Tire to Rear of Machine (includes tow hitch)10593 mm
Length – Counterweight to Ripper12051 mm
Ground Clearance at Rear Axle396 mm
Height to Top of Cylinders3088 mm
Height to Exhaust Stack3557 mm
Width – Tire Center Lines2703 mm
Width – Outside Rear Tires3411 mm
Width – Outside Front Tires3411 mm
operating specifications
Top Speed – Forward51.7 km/h
Top Speed – Reverse40.8 km/h
Turning Radius (outside front tires)9.3 m
Steering Range – Left/Right47.5°
Articulation Angle – Left /Right20°
Forward – 1st4.5 km/h
Forward – 2nd6.1 km/h
Forward – 3rd8.9 km/h
Forward – 4th12.3 km/h
Forward – 5th19.0 km/h
Forward – 6th25.8 km/h
Forward – 7th35.5 km/h
Forward – 8th51.7 km/h
Reverse – 1st3.6 km/h
Reverse – 2nd6.6 km/h
Reverse – 3rd9.7 km/h
Reverse – 4th15.0 km/h
Reverse – 5th28.0 km/h
Reverse – 6th40.8 km/h
service refill
Fuel Capacity496 L
Cooling System70 L
Hydraulic System – Total146 L
Hydraulic System – Tank70 L
DEF Tank16 L
Transmission/Differential/Final Drives98.5 L
Engine Oil36 L
Tandem Housing (each)129 L
Front Wheel Spindle Bearing Housing0.9 L
Circle Drive Housing10 L
power train
Forward/Reverse Gears8 Forward/6 Reverse
TransmissionDirect drive, power shift, countershaft
Brakes – ServiceOil-actuated, oil disc
Brakes – Dynamic Brake Torque per Wheel36701 N∙m
Brakes – ParkingSpring applied, hydraulically released
Brakes – SecondaryOil-actuated, oil-disc
hydraulic system
Circuit TypeElectro-hydraulic load sensing, closed center
Pump TypeVariable piston
Pump Output*280 L/min
Maximum System Pressure24750 kPa
Standby Pressure5900 kPa
Note*Pump output measured at 2,150 rpm.
frame
Drawbar – Width76 mm
Circle – Diameter1822 mm
Circle – Blade Beam Thickness50 mm
Drawbar – Height203 mm
Front Frame Structure – Thickness14 mm
Front Frame Structure – Height460 mm
Front Frame Structure – Width356 mm
Front Axle – Height to Center670 mm
Front Axle – Wheel Lean18° Left/17° Right
Front Axle – Total Oscillation per Side35°
blade range
Circle Centershift – Right560 mm
Circle Centershift – Left690 mm
Moldboard Sideshift – Right790 mm
Moldboard Sideshift – Left740 mm
Maximum Blade Position Angle65°
Blade Tip Range – Forward40°
Blade Tip Range – Backward5°
Maximum Shoulder Reach Outside of Tires – Right2311 mm
Maximum Shoulder Reach Outside of Tires – Left2311 mm
Maximum Lift above Ground400 mm
Maximum Depth of Cut470 mm
standards
BrakesISO 3450
ROPS/FOPSISO 3471/ISO 3499
SoundISO 6394/ISO 6395/ISO 6396
SteeringISO 5010:2007
ripper
Shank Holder Spacing – Minimum445 mm
Ripping Depth – Maximum452 mm
Ripper Shank Holders7
Penetration Force13749 kg
Pryout Force19822 kg
Machine Length Increase, Beam Raised1610 mm
tandems
Height648 mm
Width236 mm
Sidewall Thickness – Inner22 mm
Sidewall Thickness – Outer22 mm
Drive Chain Pitch63.5 mm
Wheel Axle Spacing1841 mm
Tandem Oscillation – Front Up15°
Tandem Oscillation – Front Down25°
engine
Optimized VHP Range – Net216-259 kW (290-348 hp)
variable power tier 4 finalstage ivjapan 2014 tier 4 final tier 3stage iiiajapan 2006 tier 3 or tier 2stage iijapan 2001 tier 2 – net
Gear: Forward – 1st216 kW
Gear: Forward – 2nd216 kW
Gear: Forward – 3rd222 kW
Gear: Forward – 4th227 kW
Gear: Forward – 5th232 kW
Gear: Forward – 6th239 kW
Gear: Forward – 7th244 kW
Gear: Forward – 8th259 kW
Gear: Reverse – 1st216 kW
Gear: Reverse – 2nd216 kW
Gear: Reverse – 3rd-6th222 kW
variable power tier 4 finalstage ivjapan 2014 tier 4 final tier 3stage iiiajapan 2006 tier 3 or tier 2stage iijapan 2001 tier 2 – metric
Gear: Forward – 1st216 kW
Gear: Forward – 2nd216 kW
Gear: Forward – 3rd222 kW
Gear: Forward – 4th227 kW
Gear: Forward – 5th232 kW
Gear: Forward – 6th239 kW
Gear: Forward – 7th244 kW
Gear: Forward – 8th259 kW
Gear: Reverse – 1st216 kW
Gear: Reverse – 2nd216 kW
Gear: Reverse – 3rd-6th222 kW
operating specifications
NoteCalculated with no slip and 23.5 R25 L-3 tires.
moldboard
Note*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
ripper
Shank Holder Spacing – Maximum500 mm
weights tier 4stage ivjapan 2014 tier 4 final*
Note*For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
Note**Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.
optional tire arrangements
Wheel Group: 19.5×25 MPTires: 23.5R25 Bridgestone VKT 2 Star
Wheel Group: 19.5×25 MPTires: 23.5R25 Bridgestone VKT 1 Star
Wheel Group: 19.5×25 MPTires: 23.5R25 Bridgestone VJT 1 Star
Wheel Group: 19.5×25 MPTires: 23.5R25 Michelin XHA 2 Star
Wheel Group: 19.5×25 MPTires: 23.5R25 Michelin XLDD 2 Star L5
BENEFITS AND FEATURES
OPERATING COST REDUCTION
High mechanical availability is one of your top concerns. The 16M3 helps reduce downtime ...
LEARN MOREENHANCED PERFORMANCE AND ...
You measure profitability by the ore you produce – and the more cost effectively you do ...
LEARN MORESAFETY
You consider the safety of your workers a top priority, and we’re doing our best to ...
LEARN MOREDEALER SUPPORT EVERY STEP OF ...
Your local Cat dealer is committed to helping you succeed, by ensuring you have the right ...
LEARN MORE16M3 STANDARD EQUIPMENT
- operator environment
Adjustable Electric Arm rest
Adjustable wrist rest
Air conditioner with heater
Articulation, automatic Return-to-Center
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Information display touch screen
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, cloth-covered, comfort air suspension
Storage compartments
Throttle control, electronic - power train
Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
Air-to-air after cooler (ATAAC)
Auto Diff Lock
Belt, serpentine, automatic tensioner
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent Power to ground
Critically Low Fluid Level Monitoring System
Differential, lock/unlock
Drain, engine oil, high speed
Electronic over speed protection
Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
Engine, compression brake
Ether starting aid
Fuel tank, fast fill, ground level
Fuel-water separator
Hydraulic Demand Fan
Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
OK-to-Start
Optimized VHP
Parking brake – multi disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Three variations of the C13 engine with ACERT Technology. One meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
Transmission, 8F/6R, power shift
VIMS no telematics - electrical
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1,400 CCA
Breaker panel
Electrical system, 24V
Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
Product Link
Starter, electric, heavy duty - safety
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator not present monitoring System
Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
Rearview camera
Seat belt indicator
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
Windows, tempered: – Left and right side wipers – Rear with intermittent wiper - other standard equipment
3-Bolt blade Bracket
AccuGrade ARO
Accumulators, blade lift
Brake accumulators, dual certified
Cat Grade Control Cross Slope
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
Doors (four), engine compartment, (two left, two right hand) locking
Doors, two service, left and right side
Drawbar – six shoe with replaceable wear strips
End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
Fast fill fuel, 567.8 L/min (150 gpm)
Fluid check
Frame, articulated, with safety lock
Hydraulics, load-sensing
Metallic Fuel tank, 496 L (131 gal)
Metallic DCM wear strips
Modular cooling package
Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
Radiator, two cleanout access doors
Rear bumper
Rear tandem access steps and hand bars
S∙O∙S ports: engine, hydraulic, transmission, coolant
Tandem walkway
Top adjust circle wear strips
Tow hitch (not available with ripper) - tires rims and wheels
A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight - fluids
Extended Life Coolant to –35° C (–31° F) - work toolsget
4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
16M3 OPTIONS
- operator environment
Air horn
Comfort package
Heated door
Mirrors high visibility
Mirrors, outside heated 24V
Mirrors, outside mounted
Seat heated
Seat heated/ventilated
Windows cleaning platform and ladders left-right hand side - power train
Transmission, autoshift - guards
Debris guard
Front axle cylinder guard
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard - electrical
Light, LED, warning strobe
Lights front LED
Lights, front headlights high
Lights, front headlights low
Mounting, for warning light
Service lights
Working lights halogen
Working lights LED - safety
Additional monitor for rearview camera
Enhanced access platform
Fire suppression ready
Machine Security System Key
Service access platform - other attachments
Auto-lube, Centro-matic
Auto-lube, ripper enhancement
Control, blade, variable float
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves Base+1
Hydraulic arrangements with additional hydraulic valves Base+5
Product Link Elite dual
Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
Weather, Cold Plus package - work toolsget
4.9 m (16 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 1 3∕8 in)
Push block, counterweight
Ripper, rear
Tooth, ripper - fluids
Coolant, –51° C (–60° F)
MOTEUR
High mechanical availability is one of your top concerns. The 16M3 helps reduce downtime and operating cost through improved serviceability, fuel economy and reduced maintenance. Major components are modular in design, so most can be removed and reinstalled without disturbing other components.
- Use Less Fuel – The C13 engine with ACERT™ Technology has been optimized to be as efficient as possible without compromising on performance. Additionally Engine Economy (ECO) Mode can be activated to control high engine idle speed and ensure the engine is performing as efficiently as possible with respect to fuel consumption offering additional fuel savings.
- Engineered for Maximum Production and Service Life – The center shift section of the front frame is made of heavy duty steel casting which improves stress distribution to this high load area for enhanced durability. The rear frame structure is lengthened to provide easy service access to components in the engine enclosure as well as improve machine balance. Front axle steering cylinder has been designed to enhance durability and hydraulic hoses have been routed to improve reliability.
- Ease of Maintenance – The modular cooling package makes for simple removal and installation of components on the cooling system which reduces service time. Engine enclosure doors provide complete and easy access to the engine without the impediment of any enclosure post. Also, extended maintenance intervals reduce the number of touches and downtime.
- Protecting Your Asset – Ok to Start and critically low fluid monitoring systems help prevent critical components from damage when low fluid levels are present. All information is available via the Information Display within the cab, and diagnostic codes are logged.
BENEFITS AND FEATURES
You measure profitability by the ore you produce – and the more cost effectively you do that, the more successful you are. While drills, draglines, loaders and haul trucks are responsible for producing ore, motor graders have a direct impact on how productively these machines can operate – in particular in their role in haul road maintenance.
- Machine Balance – The additional weight along with adjusted weight balance offers enhanced performance for the 16M3 by improving traction and the ability to keep ground speed especially when carrying a large load.
- Simple, Operator Friendly Emissions Technology – The 16M3 is available with three variations of the C13 engine with ACERT™ Technology. One meets U.S. EPA Tier 4 Final / EU Stage IV / Japan 2014 (Tier 4 Final) emissions standards and will be required for sale in higher regulated countries. The other options will be capable of meeting Tier 2 / State II / Japan 2001 (Tier 2) or Tier 3 / Stage IIIA / Japan 2006 (Tier 3) equivalent emission standards and are available for sale in lesser or non-regulated countries, depending on the emission standards of the specific country. Emissions reduction technology on the 16M3 Motor Grader is designed to be transparent, with no action required from the operator.
- Comfort and Control – The multi-color / touch screen Information Display is the operator’s gateway to monitoring machine performance, a convenient way of modifying machine parameters to tailor performance to the current task and access the service information for initial troubleshooting.
- Monitor, Manage, and Enhance Job Site Operations – Cat Product Link™ Elite is deeply integrated into your machine, helping you take the guesswork out of equipment management. Easy access to timely information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink® user interface can help you effectively manage your fleet and lower operating cost.
BENEFITS AND FEATURES
You consider the safety of your workers a top priority, and we’re doing our best to help you meet your safety goals. Caterpillar considers the safety of everyone in, on or around Cat equipment when developing new products or enhancing safety features for existing products. The 16M3 has numerous safety features such as but not limited to:
- Access to Tandem
- Rear View Camera
- Seat Belt Indication
- Access Platform – optional
- Service Access Platform – optional
- Fire Suppression Ready System – optional
BENEFITS AND FEATURES
Your local Cat dealer is committed to helping you succeed, by ensuring you have the right machine for the job, making parts available, and providing you with versatile work tools.