160M3 AWD MOTOR GRADER
160M3 AWD not only excels at heavier jobs - it also gives you the extra traction you need to work in the toughest ground conditions like mud, gravel or snow. The All Wheel Drive models offer a steering compensation system that gives you a “power turn” for better turning performance in poor underfoot conditions.
SPECIFICATIONS
Base Power (1st gear) - Net165.0 kW
Engine ModelCat® C9.3 ACERT™
Bore115.0 mm
BENEFITS AND FEATURES
engine
Base Power (1st gear) - Net165.0 kW
Engine ModelCat® C9.3 ACERT™
Bore115.0 mm
Stroke149.0 mm
Speed @ Rated Power2,000 rpm
AWD Off: Gear - Net Power - Forward - 1st172.0 kW
AWD Off: Gear - Net Power - Forward - 2nd180.0 kW
AWD Off: Gear - Net Power - Forward - 3rd188.0 kW
AWD Off: Gear - Net Power - Forward - 4th191.0 kW
AWD Off: Gear - Net Power - Forward - 5th195.0 kW
AWD Off: Gear - Net Power - Forward - 6th199.0 kW
AWD Off: Gear - Net Power - Forward - 7th203.0 kW
AWD Off: Gear - Net Power - Forward - 8th203.0 kW
AWD Off: Gear - Net Power - Reverse - 1st165.0 kW
AWD Off: Gear - Net Power - Reverse - 2nd172.0 kW
AWD Off: Gear - Net Power - Reverse - 3rd-6th180.0 kW
AWD On: Gear - Net Power - Forward - 1st180.0 kW
AWD On: Gear - Net Power - Forward - 2nd195.0 kW
AWD On: Gear - Net Power - Forward - 3rd199.0 kW
AWD On: Gear - Net Power - Forward - 4th203.0 kW
AWD On: Gear - Net Power - Forward - 5th219.0 kW
AWD On: Gear - Net Power - Forward - 6th219.0 kW
AWD On: Gear - Net Power - Forward - 7th219.0 kW
AWD On: Gear - Net Power - Forward - 8th219.0 kW
AWD On: Gear - Net Power - Reverse - 1st165.0 kW
AWD On: Gear - Net Power - Reverse - 2nd172.0 kW
AWD On: Gear - Net Power - Reverse - 3rd-6th180.0 kW
AWD Range - Net172-219 kW (231-293 hp)
AWD Range - Net (Metric)172-219 kW (234-298 hp)
Base Power (1st gear) - Net (Metric)165.0 kW
EmissionsU.S. EPA Tier 4 Final/EU Stage IV
High Ambient - Fan Speed - Standard1,400 rpm
Maximum Torque (AWD on)1464.0 N·m
Maximum Torque (VHP Plus)1355.0 N·m
Standard Capability43.0 ° C
Torque Rise39%
VHP Plus Range - Net165-203 kW (221-272 hp)
VHP Plus Range - Net (Metric)165-203 kW (224-276 hp)
VHP Plus: Gear - Net Power - Forward - 1st165.0 kW
VHP Plus: Gear - Net Power - Forward - 2nd172.0 kW
VHP Plus: Gear - Net Power - Forward - 3rd180.0 kW
VHP Plus: Gear - Net Power - Forward - 4th188.0 kW
VHP Plus: Gear - Net Power - Forward - 5th191.0 kW
VHP Plus: Gear - Net Power - Forward - 6th195.0 kW
VHP Plus: Gear - Net Power - Forward - 7th199.0 kW
VHP Plus: Gear - Net Power - Forward - 8th203.0 kW
VHP Plus: Gear - Net Power - Reverse - 1st165.0 kW
VHP Plus: Gear - Net Power - Reverse - 2nd172.0 kW
VHP Plus: Gear - Net Power - Reverse - 3rd-6th180.0 kW
Displacement9.3 L
Number of Cylinders6
Derating Altitude3050.0 m
High Ambient - Fan Speed - Maximum1,550 rpm
High Ambient - Fan Speed - Minimum500 rpm
High Ambient Capability50.0 ° C
weights
Operating Weight - Typically Equipped21552.0 kg
moldboard
Blade Width4.2 m
Moldboard - Height610.0 mm
Moldboard - Thickness22.0 mm
Arc Radius413.0 mm
Throat Clearance166.0 mm
Cutting Edge - Width152.0 mm
Cutting Edge - Thickness16.0 mm
End Bit - Width152.0 mm
End Bit - Thickness16.0 mm
Blade Pull - Base GVW (AWD)16700.0 kg
Blade Pull - Maximum GVW (AWD)22512.0 kg
Blade Down Pressure - Base GVW (AWD)8589.0 kg
Blade Down Pressure - Maximum GVW (AWD)13294.0 kg
Moldboard - Blade Width4.2 m
dimensions
Height - Top of Cab3308.0 mm
Length - Counterweight to Ripper10136.0 mm
Width - Outside Front Tires2511.0 mm
Length - Front Axle to Mid Tandem6123.0 mm
Length - Front Tire to Rear of Machine8912.0 mm
Length - Front Axle to Moldboard2552.0 mm
Length - Between Tandem Axles1523.0 mm
Width - Outside Rear Tires2511.0 mm
Width - Tire Center Lines2140.0 mm
Height - Front Axle Center596.0 mm
Height to Exhaust Stack3256.0 mm
Height to Top of Cylinders3040.0 mm
Ground Clearance at Rear Axle339.0 mm
operating specifications
Top Speed - Forward47.4 km/h
Top Speed - Reverse37.4 km/h
Turning Radius, Outside Front Tires7.8 m
Steering Range - Left/Right50°
Articulation Angle - Left/Right20°
Forward - 1st4.1 km/h
Forward - 2nd5.6 km/h
Forward - 3rd8.1 km/h
Forward - 4th11.2 km/h
Forward - 5th17.4 km/h
Forward - 6th23.7 km/h
Forward - 7th32.6 km/h
Forward - 8th47.4 km/h
Reverse - 1st3.3 km/h
Reverse - 2nd6.1 km/h
Reverse - 3rd8.8 km/h
Reverse - 4th13.7 km/h
Reverse - 5th25.7 km/h
Reverse - 6th37.4 km/h
service refill
Fuel Capacity394.0 L
Cooling System57.0 L
Hydraulic System - Total100.0 L
Hydraulic System - Tank64.0 L
Diesel Exhaust Fluid22.0 L
Trans./Diff./Final Drives70.0 L
Engine Oil30.0 L
Tandem Housing (each)87.0 L
Front Wheel Spindle Bearing Housing0.5 L
Circle Drive Housing7.0 L
power train
Forward/Reverse Gears8 Forward/6 Reverse
TransmissionAPECS, Direct Drive, Powershift
Brakes - ServiceMultiple Oil Disc
Brakes - Service, Surface Area23000.0 cm2
Brakes - ParkingMultiple Oil Disc
Brakes - SecondaryDual Circuit Control
hydraulic system
Circuit TypeParallel
Pump TypeVariable Piston
Pump Output210.0 L/min
Maximum System Pressure24150.0 kPa
Reservoir Tank Capacity64.0 L
Standby Pressure6100.0 kPa
frame
Drawbar - Width76.2 mm
Circle - Diameter1553.0 mm
Circle - Blade Beam Thickness40.0 mm
Drawbar - Height152.0 mm
Circle - Height160.0 mm
Front Frame Structure - Height321.0 mm
Front Frame Structure - Width305.0 mm
Drawbar - Thickness12.7 mm
Front-Top/Bottom Plate - Width305.0 mm
Front-Top/Bottom Plate - Thickness22.0 mm
Front Axle - Height to Center596.0 mm
Front Axle - Wheel Lean, Left/Right18°
Front Axle - Total Oscillation per Side32°
blade range
Circle Centershift - Right728.0 mm
Circle Centershift - Left695.0 mm
Moldboard Sideshift - Right660.0 mm
Moldboard Sideshift - Left510.0 mm
Maximum Blade Position Angle90°
Blade Tip Range - Forward40°
Blade Tip Range - Backward5°
Maximum Shoulder Reach Outside of Tires - Right2278.0 mm
Maximum Shoulder Reach Outside of Tires - Left2090.0 mm
Maximum Lift above Ground452.0 mm
Maximum Depth of Cut750.0 mm
weights awd
Gross Vehicle Weight - Base - Front Axle5004.0 kg
Gross Vehicle Weight - Base - Rear Axle13551.0 kg
Gross Vehicle Weight - Base - Total18555.0 kg
Gross Vehicle Weight - Maximum - Front Axle7745.0 kg
Gross Vehicle Weight - Maximum - Rear Axle17268.0 kg
Gross Vehicle Weight - Maximum - Total25013.0 kg
Operating Weight, Typically Equipped - Front Axle6481.0 kg
Operating Weight, Typically Equipped - Rear Axle15071.0 kg
Operating Weight, Typically Equipped - Total21552.0 kg
standards
BrakesISO 3450
ROPS/FOPSISO 3471; ISO 3499
SoundISO 6394; ISO 6395
SteeringISO 5010
scarifier
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing116.0 mm
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders5/11
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum467.0 mm
Front, V-Type, 5 or 11 Tooth - Working Width1031.0 mm
Front, V-Type: Working Width1205.0 mm
Mid, V-Type - Scarifier Shank Holder Spacing116.0 mm
Mid, V-Type - Scarifier Shank Holders11
Mid, V-Type - Scarifying Depth, Maximum292.0 mm
Mid, V-Type - Working Width1184.0 mm
Rear - Scarifying Depth, Maximum426.0 mm
Rear - Working Width2133.0 mm
Rear - Scarifier Shank Holders9
Rear - Scarifier Shank Holder Spacing267.0 mm
ripper
Ripper Shank Holder Spacing533.0 mm
Ripping Depth - Maximum426.0 mm
Ripper Shank Holders5
Penetration Force9440.0 kg
Pryout Force12924.0 kg
Machine Length Increase, Beam Raised1031.0 mm
tandems
Height572.0 mm
Width204.0 mm
Sidewall Thickness - Inner17.5 mm
Sidewall Thickness - Outer18.0 mm
Drive Chain Pitch50.8 mm
Wheel Axle Spacing1523.0 mm
Tandem Oscillation - Front Up15°
Tandem Oscillation - Front Down25°
BENEFITS AND FEATURES
160M3 AWD STANDARD EQUIPMENT
- power train
Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
Air-to-air after cooler (ATAAC)
Belt, serpentine, automatic tensioner
Brakes, oil disc, four-wheel, hydraulic
Demand fan, hydraulic, swing-out
Diesel exhaust fluid tank, 22.0 L (5.8 gal) ground level access, and sediment drain
Differential Lock/Unlock, Automatic
Drain, engine oil, ecology
Economy mode
Electronic over speed protection
Engine, C9.3 with ACERT Technology, U.S. EPA Tier 4 Final/EU Stage IV emission standards
Fuel tank, 394 L (104 gal), ground level access and sediment drain
Parking brake - multi-disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Tandem drive
Transmission, 8F/6R, powershift, direct drive, Advanced Productivity Electronic Control Strategy (APECS) - electrical
Alarm, back up
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1125 CCA
Breaker panel, ground accessible
Cab harness and electrical hydraulic valves
Electrical system, 24V
Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
Lights, roof-mounted roading, reversing, LED stop and tail
Product Link
Starter, electric - operator environment
Accelerator
Air conditioning with heater
Arm and wrist rest, electronically adjustable
Articulation, automatic Return-to-Center
Cat Messenger operator information system
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauge, machine level
Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen, DEF
Hour meter, digital
Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering
Joystick, adjustable armrests
Joystick gear selection
Joystick hydraulic power steering
Ladders, cab, left and right side
Lights, night time cab
Mirror, inside rearview, wide angle
Power port, 12V
Radio Ready, Entertainment
ROPS cab, sound suppressed 70 dB(A)
Seat, cloth-covered, comfort suspension
Seat belt, retractable 76 mm (3 in)
Storage area for cooler/lunchbox
Throttle control, electronic
Windows, laminated glass: - fixed front with intermittent wiper - door with intermittent wipers (3)
Windows: tempered: - left and right side wipers - rear and intermittent wiper - fluids
Antifreeze
Extended Life Coolant to -35° C (-30° F) - tires rims and wheels
Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight - other standard equipment
Accumulators, brake, dual certified
Anti-glare paint
Bumper, rear, integrated with hitch
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
Doors (3), engine compartment, locking
Drawbar - 6 shoes, replaceable wear strips
Electrical hydraulic valves, hydraulic lines for base 8 functions
Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
Fluid check, ground level
Frame, articulated, with safety lock
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Hydraulic lines for base functions
Lockout, hydraulic implement (for roading and servicing)
Moldboard
Mounting, cab roof accessories
Pump, hydraulic, high capacity, 98 cm³ (6 in³)
Radiator, cleanout access (both sides with swing doors)
Secondary steering
Serviceability, LH side
S·O·SSM ports: engine, hydraulic, transmission, coolant, fuel
Tandem walkway/guards
Tool box
160M3 AWD OPTIONS
- electrical
Alternator, 280 ampere
Batteries: extreme duty, 1,400 CCA
Lights: Headlights, high
Lights: Headlights, low
Lights: Working lights, basic
Lights: Working lights, plus
Lights: Warning: beacon or strobe
Lights: Mounting for warning light - guards
Articulation guard
Fenders, front, AWD
Fenders, rear
Front axle guard
Sound suppression (bottom)
Sound suppression (enclosure)
Transmission - operator environment
Mirrors, outside: heated 24V
Mirrors, outside: mounted
Comfort Plus Arrangement
Comfort Premium Arrangement - power train
Precleaner, snow
Starter, extreme duty, 1,000 Amps
Transmission, autoshift - other attachments
AccuGrade ARO
Integrated cross slope
Accumulators, blade lift
Camera, rearview
Cat Product Link 321SR
Cat Product Link 522
Drain, ecology, engine Wiggins
Heater, engine coolant: 120V
Heater, engine coolant: 240V
Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, dozer, snow plow and snow wing.
Snow wing mounting, frame ready
Starting aid, ether - work toolsget
Blade extension, left hand, 610 mm (2 ft)
Blade extension, right hand, 610 mm (2 ft)
Counterweight
Cutting edges, curved
Endbits, overlay
Front lift group, mounting
Front lift group, mechanical
Grader bit, narrow and super penetration
Mid-Mount Scarifier, Package
Moldboard: 4267 mm × 610 mm × 22 mm (14 ft × 24 in × 7/8 in)
Moldboard: 4267 mm × 686 mm × 25 mm (14 ft × 27 in × 1 in)
Moldboard: 4877 mm × 686 mm × 25 mm (16 ft × 27 in × 1 in)
Push plate
Ripper, rear
Ripper tooth
Scarifier, front
Snow Arrangement
Snow Wing Ready Package
Tow hitch - machine arrangements
Canadian Arrangement
European Arrangement
TUV Roading Arrangement - optional tire arrangements
Rim Size - 9 × 24; Wheel Group - Single-Piece; Tires - 14.0R24
Rim Size - 13 × 25; Wheel Group - Single-Piece; Tires - 17.5R25
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.0R24
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.0-24
Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5-25
Note: Consult your dealer for individual tire width, size and brand.
MOTEUR
Comfort, productivity, advanced technology
BENEFITS AND FEATURES
Visibility Good visibility is key to your safety and efficiency. Angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. An optional rear vision camera further enhances lines of sight all around the machine.
In-Dash Instrument Cluster A redesigned message display shows machine performance and diagnostic information, including DEF tank levels. Now located in the center console, it also displays Cat Grade Control Cross Slope readings conveniently in front of the operator.
Comfort and Control Experience the most comfortable cab in the industry. Joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue for better productivity. Rocker and control switches are in easy reach. An updated seat with softer cushions and three-position cushion tilt adds to your overall comfort. You can even upgrade to a heated or heated/ventilated seat. An optional seat belt indicator feature is also available. Control pods can be adjusted electronically, making it easy to set your ideal operating position. Multiple isolation mounts significantly reduce sound and vibration for a more relaxed work environment. The high capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, seals out dust and helps keep windows clear. Pop-out louvers circulate fresh air. An optional deluxe radio with CD features MP3 and Bluetooth technology.
Unprecedented precision and ease of operation
BENEFITS AND FEATURES
Two electro-hydraulic joysticks with electronically adjustable control pods help position operators for optimal comfort, visibility and productive operation.
Joystick Functions The left joystick controls machine direction, steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float. The right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock. The steer tire angle matches the joystick position. A brake tensioning system holds the joystick in position until the operator moves it. The steering control automatically reduces steering sensitivity at higher ground speeds for predictable control. Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped). Optional Programmable Auxiliary Hydraulic Pod controls up to six additional hydraulic circuits.
Electronic Throttle Control Electronic Throttle Control helps improve productivity by providing the best match of horsepower and torque for the demands of the application.
Articulation Return-to-Center Automatically returns the machine to a straight frame position from any angle with the touch of a button.
Selectable Blade Lift Modes Choose the blade lift modulation mode that best fits your application or operating style: Fine, Normal, or Coarse.
Power and reliability
BENEFITS AND FEATURES
A Cat C9.3 ACERT engine gives you the performance you need to maintain consistent grading speeds for maximum productivity. Every U.S. EPA Tier 4 Final/EU Stage IV ACERT engine is equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically helps meet your high expectations for productivity, fuel efficiency, reliability and service life.
Hydraulic Demand Fan The hydraulic demand fan automatically adjusts speed according to cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.
Engine Idle Shutdown Timer This standard feature can be software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.
Proven, integrated solutions
BENEFITS AND FEATURES
Emissions reduction technology on the M Series 3 Motor Grader is designed to be transparent, with no action required from the operator. There is no need to stop. Regeneration runs automatically at cold start-up and, if needed, in the background while you work.
Aftertreatment Technologies Caterpillar designed Tier 4 Interim products with Tier 4 Final standards in mind. To meet the additional 80 percent reduction in NOx emissions required by EPA Tier 4 Final/EU Stage IV emission standards, Caterpillar engineers only needed to add one new system to the already proven aftertreatment solution in use, Selective Catalytic Reduction (SCR).
Diesel Exhaust Fluid Selective Catalytic Reduction utilizes Diesel Exhaust Fluid (DEF), which can be conveniently filled from ground level. Simply refill the DEF tank when you refuel. A gauge on the dash shows your fluid level. When you turn the machine off, a pump will automatically purge the DEF lines. A light located inside the rear engine compartment will turn off, telling you the purge is complete and that it is safe to turn off the electrical disconnect. If the engine/aftertreatment temperatures are high, a Delayed Engine Shutdown will activate automatically to cool the machine and then purge the lines. For complete aftertreatment information, please refer to your machine’s Operation and Maintenance Manual.
Maximum power to the ground
BENEFITS AND FEATURES
- Standard Automatic Differential Lock/Unlock monitors machine and application parameters to unlock/re-lock the differential during operation, improving production and enhancing comfort while protecting the power train.
- Full Electronic Clutch Pressure Control optimizes inching modulation for smooth shifts and directional changes.
- Programmable Autoshift option simplifies operation by allowing you to program the transmission to shift at optimal points to match your application.
- New standard Economy Mode can be turned on to help save fuel by reducing engine speed so the machine works in a more efficient range. The average fuel savings is up to 10 percent, depending on the application.
- Power Shift Countershaft Transmission maximizes power to the ground.
- Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.
Front and Rear Axles The sealed spindle keeps front axle bearings lubricated and protected from contaminants. The Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending bearing life. A bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.
Hydraulic Brakes Oil-bathed multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel and have a large total brake surface area to give you dependable stopping power and longer life.
Service ease and precise blade control
BENEFITS AND FEATURES
Caterpillar designs motor grader frame and drawbar components to give you performance and durability. The one-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down. The articulation hitch features a large tapered roller bearing to carry loads evenly and smoothly. It is sealed to prevent contamination and a locking pin prevents articulation for safety during service or transport.
Easy Maintenance for More Uptime The drawbar, circle and moldboard are designed to make it easy to keep the components tight. One person can easily adjust or replace the patented top-adjust drawbar wear inserts from the top of the drawbar plate, reducing downtime to save you money. Durable nylon composite wear inserts maximize circle torque and component life. Sacrificial brass wears strips between the blade mounting group and moldboard can be easily adjusted and replaced. The Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
Blade Angle and Moldboard An aggressive blade angle, optimized moldboard curvature and large throat clearance help you work more efficiently by allowing material to roll more freely along the blade. Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts to give you greater moldboard reliability and long service life. The link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.
Advanced machine control
BENEFITS AND FEATURES
Responsive Hydraulics A proven load-sensing system and advanced electro-hydraulics give you superior implement control and responsive hydraulic performance that helps make your operator’s job easier. Continuously matching hydraulic flow/pressure to power demands creates less heat and reduces power consumption.
- Consistent, Predictable Movement - Proportional Priority Pressure-Compensating (PPP-C) valves have different flow rates for the head and rod ends of the cylinder, so you can count on consistent, predictable implement response.
- Balanced Flow - Hydraulic flow is proportioned to give you confidence that all implements will operate simultaneously without slowing the engine or speed of some implements.
Blade Float Allows the blade to move freely under its own weight. By floating both cylinders, the blade can follow the contours of the ground. Floating only one cylinder permits the toe of the blade to follow a hard surface while the operator controls the slope with the other lift cylinder.
Independent Oil Supply Large, separate hydraulic oil supplies prevent cross-contamination and provide proper oil cooling, which reduces heat build-up and extends component life. Cat XT™ hose allows high pressures for maximum power and reduced downtime.
Expanded machine versatility
BENEFITS AND FEATURES
If you work in soft underfoot conditions where traction can be a challenge, optional All Wheel Drive (AWD) can give you the additional power to the ground you need to work more efficiently in mud, gravel, sand or snow. The added traction helps reduce sliding on side slopes.
- Dedicated left and right pumps give you more precise hydraulic control. The infinitely variable pumps and motors maximize torque in each gear.
- AWD automatically increases horsepower to maximize your power to the ground.
- Standard Hydrostatic Mode disengages the transmission and provides hydraulic power to the front wheels only. Infinitely variable ground speed between 0-8 km/h (0-5 mph) is ideal for precise finish work.
- Cat Steering Compensation System enables a “powered turn” by adjusting the outside front tire speed up to 50% faster than the inside tire. This gives you improved control, reduces surface damage and greatly reduces turning radius in poor underfoot conditions.
Monitor, manage, and enhance job site operations
BENEFITS AND FEATURES
Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology-equipped machines, you’ll get more information and insight into your equipment and operations than ever before. Cat Connect technologies offer improvements in these key areas: Equipment Management - increase uptime and reduce operating costs. Productivity - monitor production and manage job site efficiency. Safety - enhance job site awareness to keep your people and equipment safe. Featured Cat Connect technologies include:
Link Link technologies provide wireless capability to machines enabling two-way transfer of information collected by on-board sensors, control modules, and other Cat Connect technologies using off-board apps, such as our VisionLink software.
Product Link™/VisionLink® Product Link takes the guesswork out of equipment management. Track location, hours, fuel usage, productivity, idle time, diagnostic codes and more through the online VisionLink interface. Manage your fleet in real time so you can maximize efficiency, improve productivity, and lower operating costs.
Grade Grade technologies combine digital design data, in-cab guidance, and automatic blade controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.
Cat Grade Control Cross Slope Cat Grade Control Cross Slope is an optional fully integrated, factory installed system that helps your operator improve grading efficiency and more easily maintain accurate cross slopes. The system automatically controls one side of the blade, reducing manual operator inputs by as much as 50 percent. Experienced operators can maintain peak efficiency levels throughout more of the work day, while less experienced operators can be more productive faster. The system is job-ready from day one, and scalable for the future with AccuGrade™ upgrade kits that provide additional 2D and/or 3D control.
Cat AccuGrade AccuGrade is an optional dealer-installed grade control system that provides higher accuracy capabilities to the Cat Cross Slope system by adding Sonic, Laser, GPS, and/or Universal Total Station (UTS) technology when the job requires. In-cab guidance helps operators work more confidently and get to grade faster, in fewer passes, using less material, improving productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, making the job site safer and more cost effective. An AccuGrade Attachment Ready Option can be ordered as a factory or dealer-installed option. It includes built-in mounting points and internal wiring for easy installation of the AccuGrade system.
Designed with protection in mind
BENEFITS AND FEATURES
Operator Presence Monitoring System Standard system keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.
Speed Sensitive Steering Standard function makes steering less sensitive as ground speed increases for greater operator confidence and control.
Secondary Steering System Standard feature automatically engages an electric hydraulic pump in case of a drop in steering pressure so the operator can steer the machine to a stop.
Hydraulic Lockout Disables all implement functions while still providing machine steering control. This standard safety feature is especially useful while roading.
Brake Systems Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure.
Walkways and Grab Rails Perforated steel tandem walkways and convenient grab rails give you a sturdy platform when moving on, off and around the machine.
Circle Drive Slip Clutch Protects the drawbar, circle and moldboard from shock loads when the blade encounters an immovable object. This standard feature also reduces the possibility of abrupt directional changes in poor traction conditions.
Blade Lift Accumulators Help absorb impact loads to the moldboard by allowing vertical blade travel. This optional feature helps reduce wear and aids operator safety.
M Series 3 Safety Features
- Optional rearview camera with in-cab monitor
- New optional seat belt indicator light reminds operator to fasten safety belt
- Grouped, ground level service points
- Laminated front window glass
- Optional LED Lighting
- Ground-level electrical disconnect switch
- Ground-level engine shutoff switch
- Anti-glare paint eases night operation
- Optional front and rear fenders
Equip your machine for the job
BENEFITS AND FEATURES
Moldboard Options The 160M3 motor grader comes equipped with a 3.7 m (12 ft) moldboard. Optional 4.3 m (14 ft) and 4.9 m (16 ft) moldboards are also available.
Ground Engaging Tools (GET) A variety of tools are available from Cat Work Tools, including cutting edges, graderbits and end bits, all designed for maximum service life and productivity.
Front Mounted Groups A front mounted push plate or front lift group are available. The front lift group can be combined with a front dozer blade or front scarifier for added versatility.
Rear Ripper/Scarifier Made to penetrate tough material fast and rip thoroughly for easier movement with the moldboard. The ripper includes three shanks (with holders for five). Nine scarifier shanks can also be added for additional versatility.
Snow Removal Work Tools Snow plow, snow wing and mounting options increase machine versatility and utilization throughout the year.
Advanced Diagnostics
BENEFITS AND FEATURES
- Cat Messenger, combined with full systems integration, enhances diagnostic capability for quick analysis of critical data.
- Electronic Technician (Cat ET) lets service technicians access stored diagnostic data and configure machine parameters through the Cat Data Link.
- Low Battery Elevated Idle raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.
- Automatic Engine Deration protects the engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected.
When uptime counts
BENEFITS AND FEATURES
Cat motor graders are designed to help you increase uptime and reduce costs. Grouped service points and extended service intervals save maintenance time. New optional LED lights in the left hand compartment makes it more convenient to service the machine in low light.
Unparalleled Dealer Support When it comes to supporting you, Cat dealers are second to none. From machine selection and purchase to maintenance support and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running.
Thinking generations ahead
BENEFITS AND FEATURES
Fuel Efficiency
- Integrated machine systems and technologies improve productivity for greater accuracy, allowing the machine to do more work per gallon of fuel.
- New Economy Mode feature allows the machine to work in the most efficient engine speed range to help reduce fuel use.
Green House Gas Emissions
- Reduced fuel consumption means reduced CO2 emissions.
- M Series 3 Motor Graders meet U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Material Efficiency and Lifecycle Costs
- Replaceable wear parts save maintenance time and cost, and extend major component life.
- Major components are built to be rebuilt, eliminating waste and saving customers money by giving the machine and/or major components a second - and even third - life.
- Approximately 95% of machine materials can be recycled (ISO 16714) to conserve valuable natural resources and further enhance machine end-of-life value.
Sound • Reduced engine noise and quieter cabs mean lower operator and spectator sound levels.
Safety
- Ecology drains help make draining fluids more convenient and help prevent spills.
- Cartridge style hydraulic fluid filters provide safe clean draining of filters prior to replacement, helping to prevent fluid spills.
- A variety of safety features help safeguard operators and others on the job site.