CAT® C1.7 DIESEL ENGINE
Cat® C1.7 Industrial Diesel deliver impressive performance throughout a wide speed range with exceptional power density. Their ultra-compact package size and extensive choice of options ensures these engines are ideal for a wide range of small, off road applications. Single-side servicing improves ease of maintenance and lowers overall owner operating costs.Industries and applications powered by C1.7 engines include: Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Turf and Landscaping and Underground Mining Equipment.C1.7 engines, with ratings: 23.6 & 26.1 bkW (31.6 & 35 bhp) @ 2400 & 2600 rpm, meet EPA Tier 4 Interim equivalent emission standards. They are available using U.S. EPA Flexibility, and for other regulated and non-regulated areas.
SPECIFICATION
Minimum Power23.6 bkW
Puissance maximale26.1 bkW
Fréquence2400
puissance nominale
Minimum Power23.6 bkW
Puissance maximale26.1 bkW
Fréquence2400
2600 rpm
Normes sur les émissionsÉmissions
us epa tier 4 interim equivalent
GeneralEngine Configuration
diesel 3 cylindres en ligne cycle a 4 temps
GeneralAlésage
84 mm 33 in
GeneralCourse
100 mm 39 in
GeneralCylindrée
1662 l 1014 in³
GeneralAspiration
atmospherique amerique du nord
GeneralTaux de compression
2301
GeneralSystème de combustion
indirect injection
GeneralRotation (côté volant)
sens inverse dhorloge
GeneralLube System (refill)
106 l 112 us qt
Engine Dimensions (Approximate. Final dimensions dependent on selected options)Longueur
564 mm 222 in
Engine Dimensions (Approximate. Final dimensions dependent on selected options)Largeur
453 mm 178 in
Engine Dimensions (Approximate. Final dimensions dependent on selected options)Hauteur
654 mm 257 in
Engine Dimensions (Approximate. Final dimensions dependent on selected options)Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
160 kg 353 lb
C1.7 EQUIPEMENT STANDARD
- air inlet system
Inlet manifold with choice of inlets. - systeme de commande
Alternator 12 volt 40 amp
Starter motor 12 volt
Glow plug starting aid - circuit de refroidissement
Belt-driven coolant pump
Coolant temperature switch
Choice of cooling fans - flywheel
Flywheel Housing - sae no 6 12 flywheel###choice of sae no 5 or standard backplate flywheel housing
Circuit de carburant - pompe dinjection de carburant###spinon fuel filter###electronic shutoff solenoid esos
Système de lubrification - lube oil filter###lube oil pressure switch###lube oil sump
General - cast iron engine block###cast iron exhaust manifoldside outlet###cold start capability to 20° c 4° f###gradeability 35° continuous###paint caterpillar yellow with optional colors available at request