CAT® C13 ACERT DIESEL ENGINE
Providing reliable Cat® power for applications requiring 287-388 bkW (385-520 bhp), Cat® C13 ACERT Industrial diesel engines are proven performers, providing greater options for customers who require powerful flexibility for their equipment. More importantly, they're backed by the world-class Cat dealer network ready to service and support every Cat industrial engine.Industries and applications powered by C13 ACERT engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.C13 ACERT engines, with ratings: 287-388 bkW (385-520 bhp) @ 1800-2100 rpm, meet U.S. EPA Tier 4 Interim, EU Stage IIIB emission standards and are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. This information about Emissions describes the particular rating's emissions technology. For more information about emissions certification, please contact your local Cat dealer.
SPECIFICATION
Minimum Power287.0 bkW
Puissance maximale388.0 bkW
Fréquence1 800-2 100 tr/min
puissance nominale
Minimum Power287.0 bkW
Puissance maximale388.0 bkW
Fréquence1 800-2 100 tr/min
normes sur les emissions
ÉmissionsNorme américaine EPA Tier 4 Interim ou EPA Tier 4 Final, norme européenne Niveau IIIB ou Niveau IV
general
Engine ConfigurationDiesel 6 cylindres en ligne, cycle à 4 temps
Alésage130 mm (5,1 in)
Course157 mm (6,2 in)
Cylindrée12,5 l (762,8 in³)
AspirationTurbocharged-Aftercooled (TA)
Taux de compression17.0:1
Système de combustionInjection directe
Rotation (côté volant)Sens inverse d'horloge
Cooling System Capacity18.7 L (19.8 qt)
Lube System (refill)34 l (35,9 US qt)
engine dimensions approximate final dimensions dependent on selected options
Longueur1203-1272 mm (47.2-50.1 in)
Largeur933-996 mm (36.74-39.2 in)
Hauteur1132-1186 mm (44.6-46.7 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)1143-1350 kg (2520-2976 lb)
aftertreatment dimensions approximate final dimensions dependent on selected options
Longueur1053-1077 mm (41.5-42.4 in)
Largeur779,8-1 069 mm (30,7-42,1 in)
Hauteur451,3-654 mm (17,8-25,7 in)
Poids248-259 kg (547-571 lb)
Diamètre330,2 mm (13 in)
petu dimensions tier 4 final stage iv only
Longueur854 mm (33,6 in)
Largeur287 mm (11,3 in)
Volume Capacity48,4 l (51,1 US qt)
Poids19,42 kg (42,8 lb)
Hauteur551 mm (21,7 in)
C13 ACERT™ EQUIPEMENT STANDARD
- air inlet system
Avec turbocompresseur
Air-to-Air Aftercooled
Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV) - systeme de commande
Système de commande électronique
Over-foam wiring harness
Compensation automatique de l'altitude
Power compensated for fuel temperature
Configurable software features
Engine monitoring system SAE J1939 broadcast and control
Integrated Electronic Control Unit (ECU)
Remote fan control - circuit de refroidissement
Vertical or RH thermostat outlet
Centrifugal water pump
Guidance on cooling system design available through your dealer to ensure equipment reliability - flywheels and flywheel housing
SAE No. 1 flywheel housing
Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV). - circuit de carburant
MEUI injection
Primary fuel filter
Secondary fuel filters
Fuel transfer pump
Electronic fuel priming - systeme de lubrification
Open crankcase ventilation system
Refroidisseur d'huile
Oil filler
Lube oil filter
Jauge d'huile
Gear driven oil pump
Choice of front, rear or center sumps
Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV) - power take off pto
SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications. - general
Paint: Caterpillar yellow, with optional colors available at request - us epa tier 4 interim eu stage iiib aftertreatment clean emissions control equipment
Système de régénération Cat
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
NOx Reduction System (NRS)
Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
Available in 12 volt or 24 volt systems - us epa tier 4 final eu stage iv aftertreatment clean emissions control equipment
Système de régénération Cat
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
Aftertreatment Electronic Control Unit (ECU)
NOx Reduction System (NRS)
Pump Electronic Control Unit (PETU)
Réduction catalytique sélective (RCS)
Available in 12V or 24V systems